Rabbeted Latch
and Strike Kit
39-030
Rabbeted Latch and Strike Kit
Rabbeted latch and strike kit finishes: 605, 626.
This kit adapts square corner latches and strikes for ¹⁄₂
(13 mm) rabbeted door and frame preparations.
Strikes
All Schlage strikes are furnished complete with screws. The 10-001
standard S-Series strike has a 1¹⁄₈ (29 mm) lip. When ordering
separately, specify quantity, product number, finish, and lip length.
Standard strike is shown in bold type.
Number Lip Length Description
10-001
1, 1¹⁄₈ (std), 1¹⁄₄, 1¹⁄₂, 1³⁄₄, 2 1¹⁄₈ x 2³⁄₄
(29 mm x 70mm)
(25 mm, 29 mm, 32 mm, 38mm, 44 mm, 51mm)
Square corner, standard
10-004
1¹⁄₈ 1¹⁄₈ x 2³⁄₄ (29 mm x 70 mm)
(29 mm)
¹⁄₈ (3 mm) Radius, round cnr.
10-025
1³ ⁄₁₆,1³⁄₈ 1¹⁄₄ x 4⁷⁄₈ (32 mm x 124mm)
(30 mm, 35mm)
ANSI
10-026
1¹⁄₈ 1⁵⁄₈ x 2¹⁄₄
(41 mm x 57mm)
(29 mm)
Full lip, square corner
1¹⁄₈
1⁵⁄₈ x 2¹⁄₄
(41 mm x 57mm)
10-027
(29 mm)
Full lip, ¹⁄₄ (6 mm) radius,
round corner
K510-066 — Box, ANSI
T-Strike – Standard
10-001
1¹⁄₈ x 2³⁄₄ x ³⁄₃₂
(29 mm x 70mm x 2 mm)
ANSI Strike
10-025
1¹⁄₄ x 4⁷⁄₈ x ³⁄₃₂
(32 mm x 124mm x 2 mm)
10-026 10-027
To Next Page
Loading...
