Schlage M490G - User Manual

*23697287*
23697287
Swinging Application
For swinging application, go to page 3.
Sliding Application
For sliding application, go to page 5.
Electromagnetic Locks
M490G
Installation Instructions
Gate
Gate
Post
Post
Features
Magnetic Bond Sensor (MBS)
Detects proper bond between magnet and armature. It can be
monitored remotely.
Door Position Switch (DPS)
Indicates whether door is open or closed. This feature is used in
conjunction with the MBS.
Electrical Specifications
Model
Amps (12VDC)
Per Lock
Amps (24VDC)
Per Lock
Holding Force
(lbs) Per Lock
M490G 0.650 0.350 1500
Warnings and Cautions
WARNING
Warnings indicate potentially hazardous conditions, which if not
avoided or corrected, may cause death or serious injury.
Pre-Installation Considerations
• Use ONLY the hardware provided for mounting this product.
• Follow the installation procedure as described in this manual.
• Operational temperature range is -31°F to 151°F (-35°C to 66°C).
• This product can be rehanded. Determine the proper door
handing before installing the product. See page 2 for rehanding
instructions.

Summary

Features

Magnetic Bond Sensor (MBS)

Detects proper bond between magnet and armature for remote monitoring.

Door Position Switch (DPS)

Indicates door open/closed status, used in conjunction with the MBS.

Warnings and Cautions

Electrical Specifications

Pre-Installation Considerations

Rehanding Instructions

Swinging Lock Installation

Sliding Lock Installation

Wiring Installation

Schlage M490G Specifications

General

Type	Mortise Lock
Series	M Series
Handing	Reversible
Backset	2-3/4"
Keyway	Schlage C
Latch Bolt	1/2" Throw
Warranty	Limited Lifetime
Door Thickness	1 3/4" (44 mm) standard. 1 3/8" (35 mm) - 2 1/4" (57 mm) available
Grade	Grade 1