C Change faceplate, if necessary.
Choose the drawing that matches your door edge.
Door Edge
No change necessary.
OR
Door Edge
Install Lock
1 Install the bolt.
OR
Wood Block
(Not Included)
Actual Size
CAUTION
Bolt must remain retracted
throughout installation!
Retracted Extended
2 Install the touchscreen on the outside of the door.
Slide tailpiece through the slot in the bolt, and route wire
over bolt.
3 Install the thumbturn assembly.
3a Rotate the thumbturn to a vertical position.
3b Remove the battery cover.
3c Route battery cable from the touchscreen through the hole
in the thumbturn assembly.
To Next Page
Loading...
