Why deadbolt requires two attempts to lock or unlock on Schlage Locks?
If the Schlage lock's deadbolt requires two attempts to lock or unlock, the deadbolt/frame alignment might be marginal. Adjust the door/frame for best operation. Browse to answers.schlage.com for help.
Why can't I delete a User Code on my Schlage lock?
If you are unable to delete a User Code on your Schlage lock, it could be due to several reasons. Ensure that '2' was pressed after entering Programming Mode. Additionally, the first User Code entered must match a current User Code, and the second User Code entered must match the first.
Why can't I change Programming Code on my Schlage lock?
If you are unable to change the Programming Code on your Schlage lock, ensure that '3' was pressed after entering Programming Mode. Also, the second Programming Code entered must match the first. Finally, the first 4-6 digits of the new Programming Code cannot match an existing User Code.
Why can't I delete all User Codes on my Schlage lock?
If you are unable to delete all User Codes on your Schlage lock, ensure that '6' was pressed after entering Programming Mode and that the 2nd Programming Code entered was valid.
What does 3 Red lights when Outside Schlage Button is pressed on Schlage lock mean?
If the Outside Schlage Button is pressed and you see 3 Red lights, the battery is critical and must be replaced.
General| Alarm | Yes |
|---|---|
| Compatibility | Z-Wave (BE469NX CAM/CEN/ACC) |
| Battery Type | AA |
| Number of Batteries | 4 |
| Material | Metal |
| Key Override | Yes |
| Programmable Codes | Yes |
| Auto-Lock Feature | Yes |
| Weather Resistance | Yes |
| Finish | Aged Bronze, Bright Brass, Satin Nickel, Matte Black |
| Keypad | Touchscreen |
| User Codes | Up to 30 |
| Backup Power Option | 9V battery |
| Finish Options | Aged Bronze, Bright Brass, Satin Nickel |
| Installation | Standard door prep |
How to lock the deadbolt from the exterior of the door.
How to unlock the deadbolt from the exterior using a valid User Code.
How to lock the deadbolt from the interior using the thumbturn.
How to unlock the deadbolt from the interior using the thumbturn.
Adds one User Code. Codes can be 4-8 digits long. All codes must match length.
Removes one User Code at a time from the lock's memory.
Sets the 6-digit code used to access and modify lock programming.
Removes all programmed User Codes from the lock.
Sets User Code length (4-8 digits), which deletes all existing codes.
Automatically relocks the deadbolt 30 seconds after unlocking.
Instructions on how to turn the alarm system on or off using the Inside Schlage Button.
Details alarm modes (Activity, Tamper, Forced Entry), their triggers, indicator lights, and sounds.
To Next Page