Need help?Do you have a question about the Schlage L460 and is the answer not in the manual?
General| Series | L Series |
|---|---|
| Handing | Non-Handed |
| ANSI Grade | Grade 1 |
| Function | Passage, Privacy, Entry, Classroom, Storeroom |
| Door Thickness | 1-3/4" |
| Backset | 2-3/4" |
| Keyway | Schlage C |
| Finish | Various Finishes Available |
Details on certifications, case size, deadbolt, latchbolt, strike, backset, cylinder, and door range.
Explanation of dot chart notation (= (1) Part, 2 = (2) Parts) for parts identification.
Introduction of M Collection decorative levers now available with L-Series locks.
Describes the single dummy trim function and its components.
Details the passage latch function and its components.
Explains the privacy lock function and its components.
Explains the privacy function with a deadbolt.
Details the privacy function with turns on both sides.
Explains the double dummy function with active trim.
Describes the office and inner entry lock function.
Explains the classroom security lock function.
Describes the storeroom lock function.
Details the electrically locked (fail safe) function.
Explains the electrically unlocked (fail secure) function.
Describes the institution lock function.
Details the entrance lock function.
Explains the prison lock function.
Describes the privacy lock with an "Occupied" indicator.
Details the double cylinder lock function.
Explains the exit lock function for multipoint locks.
Describes the door bolt function.
Exploded view and parts list for L0170 single dummy trim (levers/knobs).
Exploded views and parts for L9010/LM9310 passage latch trims.
Exploded views and parts for LM9325 exit trims.
Exploded views and parts for electrically locked/unlocked trims.
Details O/S knob and lever options for L9000 series trims.
Details I/S knob and lever options for L9000 series trims.
Details I/S rose options for L9000 series trims.
Details O/S rose and bushing options for L9000 series trims.
Exploded views and part numbers for L400-Series lock cases.
Exploded views and part numbers for L9010 lock case.
Exploded views and part numbers for LM9310/LM9325 lock cases.
Exploded views and part numbers for L9040 series lock cases.
Exploded views and part numbers for LV9040 series lock cases.
Exploded views and part numbers for L9050 series lock cases.
Exploded views and part numbers for LV9050 series lock cases.
Exploded views and part numbers for LM9350 series lock cases.
Exploded views and part numbers for LMV9350 series lock cases.
Exploded views and part numbers for L9056 lock case.
Exploded views and part numbers for LV9056 lock case.
Exploded views and part numbers for L9076/L9077 lock cases.
Exploded views and part numbers for LV9076/LV9077 lock cases.
Exploded views and part numbers for L9080 lock case.
Exploded views and part numbers for LV9080 lock case.
Exploded views and part numbers for L9082 lock case.
Exploded views and part numbers for L9082EL lock case.
Exploded views and part numbers for L9082EU lock case.
Exploded views and part numbers for L9110 x XL11-741 lock case.
Exploded views and part numbers for L9175 lock case.
Exploded views and part numbers for L9176 lock case.
Exploded views and part numbers for L9440/L9444 lock cases.
Exploded views and part numbers for LV9440/LV9444 lock cases.
Exploded views and part numbers for L9453 lock case.
Exploded views and part numbers for LV9453 lock case.
Exploded views and part numbers for L9456/L9457/L9496 lock cases.
Exploded views and part numbers for LV9456/LV9457/LV9496 lock cases.
Exploded views and part numbers for L9458 lock case.
Exploded views and part numbers for LV9458 lock case.
Exploded views and part numbers for L9460/L9462/L9463/L9464 lock cases.
Exploded views and part numbers for L9460 x XL11-635 lock case.
Exploded views and part numbers for L9460/L9462/L9464 x XL11-886 lock cases.
Exploded views and part numbers for L9465/L9466/L9473 lock cases.
Exploded views and part numbers for L9480/L9485/L9486 lock cases.
Exploded views and part numbers for LV9480/LV9485/LV9486 lock cases.
Exploded views and part numbers for L9482 x XL11-543 lock case.
Exploded views and part numbers for LV9482 x XL11-543 lock case.
Exploded views and part numbers for L9485 x XL11-557 lock case.
Table showing compatibility between parts for locks manufactured in 1994.
Exploded view showing assembly of turn hub spring and transfer lever.
Exploded view showing assembly of locking catch and locking link.
Exploded view showing assembly of L function parts.
Exploded view showing assembly of LV function parts.
Illustrations and dimensions of standard cast or forged levers.
Illustrations of various decorative lever styles.
Illustrations of various decorative rose styles.
Illustrations and dimensions of M Collection levers.
Illustrations of Danmark stainless steel levers and rose.
Illustrations and dimensions of wrought knob designs.
Details on rose trim designs A and B for knobs.
Dimensions for outside rose configurations.
Dimensions for outside escutcheons on L series trims.
Illustrations of various outside escutcheon options for L series.
Illustrations of inside escutcheon options for L series.
Dimensions for outside escutcheons on N series trims.
Illustrations of various outside escutcheon options for N series.
Illustrations of inside escutcheon options for N series.
Details on coin turn options for trims.
Information on coin turn and plug options.
Details on occupancy indicator options (Do Not Disturb, Occupied, Locked).
Information on thumbturn options for deadbolt and privacy locks.
Details on ADA cylinder turn options for specific locks.
Information on cylinder classroom turn options.
Details on ADA thumbturn for rose trim.
Information on ADA thumbturn with escutcheons.
Details on ADA thumbturn with blank escutcheon.
Details on emergency turn options.
Information on emergency button options.
Details on modified levers for Folger Adam Co. Lever Trak™.
Information on breakaway driver bars for occupancy indicators.
Details on tactile warning (knurling) options for knobs/levers.
Lists part numbers for escutcheon thru-bolts/screws and door thickness.
Lists part numbers and contents for standard screw packs.
Details part numbers and contents for tamper-resistant Torx® screw packs.
Details mounting post options for L and LV functions.
Lists spindle and spring options for various lock functions.
Information on mounting plates for trim on one side of the door.
Diagram showing door preparation dimensions and backset measurement.
Illustrations and functions for 1¾” square corner armor fronts.
Illustrations and functions for 1½” square corner armor fronts.
Illustrations of standard square corner strikes with various lip sizes.
Illustrations of square corner strikes with no lip.
Illustrations of square corner strikes with no lip.
Illustrations of L400 Series square corner strikes with no lip.
Illustrations of L400 Series square corner strikes with no lip.
Illustrations of L/RR and R/LR armor strikes.
Illustrations of square corner strikes with specific lip and series designations.
Illustration of L9000 Series strike reinforcer.
Illustration of strike box K510-066.
Table detailing strike dimensions, lip, lock series, strike box, and screws.
Diagrams illustrating how to measure cylinder lengths for full face and concealed types.
Table detailing cylinder requirements based on function, trim, and door thickness.
Exploded view of an Everest modular mortise cylinder and its components.
Exploded view of a classic modular mortise cylinder and its components.
Exploded view of a hotel mortise cylinder and its components.
Details cylinder mechanisms, complete cylinders, and cams for L/LV series.
Details cylinder types, mechanisms, and cams for L/LV Series L9060/LV9060 outside.
Details cylinder types, mechanisms, and cams for LM/LMV Series LM9380/LMV9380.
Exploded view of an Everest concealed mortise cylinder and its components.
Exploded view of a classic concealed mortise cylinder and its components.
Exploded view of a hotel concealed mortise cylinder and its components.
Diagram of an assembled concealed cylinder.
Details cylinder types, mechanisms, and cams for L/LV Series.
Details cylinder types, mechanisms, and cams for L, LV-Series L9060/LV9060.
Exploded view of full size classic interchangeable core cylinders.
Exploded view of full size hotel classic interchangeable core cylinders.
Details cylinder types, mechanisms, and cams for L/LV/LM/LMV Series.
Details cylinder types, mechanisms, and cams for L, LV-Series L9060/LV9060.
Details cylinder types, mechanisms, and cams for LM, LMV-Series LM9380/LMV9380.
Diagrams of assembled full size interchangeable cores and their part numbers.
Lists part numbers for components of full size interchangeable cores.
Exploded view of small format Everest keyways and components.
Lists part numbers and descriptions for Everest patented keyway cores.
Details cylinder types, mechanisms, and cams for L/LV/LM/LMV Series.
Details cylinder types, mechanisms, and cams for L, LV-Series L9060/LV9060.
Details cylinder types, mechanisms, and cams for LM, LMV-Series LM9380/LMV9380.
Illustration and dimension information for the 36-079 blocking ring.
Illustration and dimension information for the 36-082 blocking ring.
Illustration and dimension for the 36-083 compression ring and spring.
Illustration for the L583-195 cylinder spring.
Table listing dimensions for various blocking ring lengths.
Table detailing blocking ring requirements for L-Series/LV-Series cores.
Table detailing SFIC blocking ring requirements for L-Series/LV-Series.
Details on the solid latchbolt option.
Information on armor front for deadbolt functions.
Details on L9000 series lead lining.
Information on L400 series lead lining.
Details on special cylinder applications and ordering notes.
Lists anti-ligature conversion kits for knobs, levers, deadbolts, and trims.
Illustration of the universal clamp installation tool.
Illustration of the L-Series front side installation template.
Illustration of the L-Series reverse side installation template.
Illustration of the mortise pocket filler installation tool.
Illustration and contents of the mortise lock jig kit.
List of components included in the 40-054 maintenance kit.
Explanation of the L9080 EL fail-safe electrically locked function.
Explanation of the L9080 EU fail-secure electrically unlocked function.
Details the L9082 EL/EU electrically controlled function for both sides.
Information on cylinder compatibility with electrically locking locks.
Details the replacement kit for solenoid and driver.
Specifies voltage, peak current, holding current, and operating temperature.
Guidance on installation best practices and electrical considerations.
Explanation of the microswitch function for RX feature.
Details on latch monitoring microswitch for specific functions.
Overview of the LM9300 three-point locking chassis and its features.
Lists LM9000 and LM9300 parts for multipoint lock top/bottom latches.
Guide for lubricating lock components with specified quantities and locations.
Explanation of door handing terms (LH, RH, RRB, LRB) and hinge side.
Step-by-step instructions for changing the lock hand.
Instructions for changing the cylinder turn hand.
Guidelines for ordering Schlage products with a sequential data format.
Table listing BHMA codes and descriptions for lock finishes.
Details the 3-year limited warranty for commercial applications.
Lists specific warranty restrictions and additional warranty information.
To Next Page
