TheConsoleSetupModeletsyouinputthedateandtime,settheunitsofmeasurementtoeitherEnglishorMetric,change
themachinetype,controlthesoundsettings(on/00, orseemaintenancestatistics(ErrorLogandRunHours- forservice
technicianuseonly).
1. HolddownthePAUSE!ENDbuttonandRightbuttontogetherfor3 secondswhileinthePower-UpModeto gointothe
ConsoleSetupMode.
Nete"PushPAUSE/ENDtoexittheConsoleSetupModeandreturntothePower-UpModescreen.
2. TheConsoledisplayshowstheDatepromptwiththecurrentsetting.Tochange,pushtheIncrease/Decreasebuttonsto
adjustthecurrentlyactivevalue(flashing).PushtheLeft/Rightbuttonstochangewhichsegmentisthecurrentlyactive
value(month/ day / yea0.
3. Push OK to set.
4. The Console display shows the Time prompt with the current setting. Push the Increase/Decrease buttons to adjust the
currently active value (flashing). Push the Left/Right buttons to change which segment is the currently active value (hour /
minute / AM or PM).
5. Push OK to set.
6. The Console display shows the Units prompt with the current setting. To change, push OK to start the Units option. Push
the Increase/Decrease buttons to change between "MILES" (Imperial English units) and "KM" (metric units).
Nete" If the units change when there is data in User Statistics, the statistics convert to the new units.
7. Push OK to set.
8. The Console display shows the Sound Settings prompt with the current setting. Push the Increase/Decrease buttons to
change between "ON" and "OFF".
9. Push OK to set.
10. The Console display shows the TOTAL RUN HOURS for the machine.
11. For the next prompt, push the OK button.
12. The Console display shows the Software Version prompt.
13. For the next prompt, push the OK button.
14. The Console will display the Power-Up Mode screen.
To Next Page
Loading...
Need help?
General
