Schwinn IC3 - Edit Mode; Changing Unit Measures (English Imperial;Metric)

21
Auto Shut-Off (Sleep Mode)
IftheConsoledoesnotreceiveanyinputinapproximately4minutes,itwillautomaticallyshutoff.TheLCDdisplayisoff
while in Sleep Mode.
Note: The Console does not have an On/Off switch.
Resistance Adjustment
To adjust the resistance and workload, turn the resistance adjustment knob.
Edit Mode
TosetaTIME,CALORIESorDISTANCEgoalforyourworkout,pushtheMODEbuttontomovetothedesiredeld.The
eldwillblink.UsetheUpandDownarrowkeystoadjustthevalue.
Note: To reset the value to zero (0), push RESET.
PushMODEtomovetothenexteld.
ToexitfromEditMode,startpedaling.
Changing Unit Measures (English Imperial/Metric)
The default distance unit is kilometers (K). You can switch units between kilometers and miles before you start a workout,
or after you reset the Console. To change the units, push UP and DOWN together and hold 3 seconds. When the display
begins to blink, use the arrow button to change the units (K or M). Press any key to save.