Schwinn IC3 - Product Specifications; Assembly Preparation and Tips

6
SPECIFICATIONS
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard,levelsurface.Allowaworkoutareaofaminimum97”x69”(2.5mx1.8m).
Basic Assembly Tips
Followthesebasicpointswhenyouassembleyourmachine:
• Read and understand the “Important Safety Instructions” before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclock-
wise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, carefully lift and look through the bolt holes to help insert the bolt through the holes.
• The assembly requires 2 people.
Maximum User Weight: 300lbs.(136kg)
Machine Weight:  101lbs.(46kg)
Dimensions:   48.7”x21.2”x49.8”(123.7cmx53.9cmx126.6cm)
Power Requirements: 2 AA Batteries (SUM3)
 OperatingVoltage:  3VDC
WARNING! This product, its packaging, and components contain chemicals known to the State of California to cause
cancer,birthdefects,orreproductiveharm.ThisNoticeisprovidedinaccordancewithCalifornia’sProposition65.Ifyou
wouldlikeadditionalinformation,pleaserefertoourwebsiteatwww.nautilus.com/prop65.
Specications