Schwinn IC3 - Maintenance and Care; General Maintenance and Safety; Routine Maintenance Tasks

22
Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is required to do
the necessary tasks.
Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that
regular maintenance is done. Worn or damaged components must be repaired or replaced immediately.
Only manufacturer supplied components can be used to maintain and repair the equipment.
If at any time the Warning labels become loose, unreadable or dislodged, contact Nautilus Customer
Service for replacement labels.
Disconnect all power to the machine before you service it.
Daily: Beforeeachuse,examinetheexercisemachineforloose,broken,damaged,
or worn parts. Do not use if found in this condition. Repair or replace all parts at
therstsignofwearordamage.Makesureadjustmentknobsaretight.Tighten
as necessary. After each workout, use a damp cloth to wipe your machine and
Console free of moisture.
Note:AvoidexcessivemoistureontheConsole.
Weekly: Clean the machine to remove any dust, dirt, or grime from the surfaces.
Check for smooth seat operation. If needed, sparingly apply a thin coating of
silicone lube to ease operation.
Silicone lubricant is not intended for human consumption. Keep out
of reach of children. Store in a safe place.
Note: Do not use petroleum based products.
NOTICE: If necessary, only use a mild dish soap with a soft cloth to clean the
Console. Do not clean with a petroleum based solvent, automotive cleaner, or
any product that contains ammonia. Do not clean the Console in direct sunlight
or at high temperatures. Be sure to keep the Console free of moisture.
Monthly
or after 20
hours:
Check pedals and crank arms and tighten as necessary. Make sure all bolts and
screws are tight. Tighten as necessary.
Check the drive belt tension.
MAINTENANCE