9
2. Attach Pedals to Frame Assembly
Note: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation is based
from a seated position on the bike. The Left Pedal has an “L”, the Right Pedal an “R”.
3. Attach the Handlebar Post and Seat Post to the Frame Assembly, and then Attach the Seat
NOTICE: Make sure the Handlebar Post Adjustment Handle engages the holes in the Handlebar Post, and the Seat Adjust-
ment Knob engages the holes in the Seat Post. When fully tightened, the Handlebar Post Adjustment Handle must point
downward.
5
11
3
4
2
C
A
B
To Next Page
Loading...
