Figure 6:
The appearance of the tray, the direction of the insertion of the microtiter plate
or the slide holder.
Avoid such handling of the microtiter plate and tray that would lead to:
Incorrect insertion of the plate,
Disallowed tampering with the door of the device and the tray;
The bottom of the plate must sit smugly on the bottom of the tray.
Do not touch the plate tray as it slides in/out.
Please read the 1.1 Safety and general warnings chapter again.
Scienion AG, 2019, Original user manual, sciREADER CL2 13
To Next Page