In case of incorrect sample insertion, contamination of the device and its surroundings may
occur, which could have a detrimental impact on user’s health.
When handling biological material, use protective equipment.
Do not place barriers or obstacles in the area in front of the door of the device, and do not
insert any extraneous objects into the door space.
Do not insert any extraneous objects into the rack. Use only supported formats of input
samples.
Samples must always be deposited directly into the rack. For accurate placing of samples,
always use the locking elements fixed on the rack.
Do not make any alterations to, or interfere with, the device construction, and do not attempt
to manipulate the internal components of the device.
Removal of the cover is allowed only in cases of dish loosening or after device contamination.
The device must be disconnected from the power supply before manipulation.
In order to air convection, cooling and the ejection of the tray always ensure there is a space
of at least 10 – 15 cm around the device.
Incorrect choice of lighting can negatively impact the image appearance for analysis and
related diagnostics.
Failure of the user to pay proper care and attention can result in the image of the sample
being evaluated incorrectly.
1.3. License agreement
The license agreement is an integral component of the purchased version of the software product. At
the first run of the software, the responsible person is called upon to confirm the License Agreement. In
agreeing to the terms, the user agrees to be bound by all the provisions.
1.4. Warranty conditions
Damage to the equipment during unauthorized handling may lead to loss of warranty.
The rights and obligations of the seller regarding the guarantee liability shall be governed by generally
binding legal regulations.
Scienion AG, 2019, Original user manual, sciREADER CL2 8
To Next Page
Loading...