Intended use
The
sciREADER CL2
is a device designed for the acquisition and processing of images of the wells of a
microtiter plate in the standard 128 x 86 mm format. It is primarily designed for the analysis of plates
with 96 wells, but also allows the analysis of plates with a different number of wells and further allows
use holder up to 4 slides.
Main application fields:
microbiology, immunology, serology;
research and development.
Because of the variability of the plate material (microtiter plate, slides etc.) and the types of analyses,
the device is equipped with several types of lighting:
Top lighting of the sample - non-transparent material.
Bottom lighting of the sample - transparent material.
In the manufacture and testing, the requirements of Directive 2006/42/EC, 2014/30/EU were applied.
The device is also intended for research and development purposes (RUO).
Missapplication
The user of this device is obliged to become familiar with this manual before starting to use
the device and is further obliged to proceed according to this manual.
If the device is used contrary to chapter 1.1 Safety and general warnings and the user does
not follow the instructions in this chapter, it may result in injury to the operator, damage to
the device, or the loss of warranty.
Preventive measures
Preventative measures will result in the elimination of residual risks, and minimise or eliminate problems
which could result from incorrect use of the sciREADER CL2.
Personnel using the device must have undergone training by a member of
Scienion AG
staff.
Training can be in the form of webinar or online training.
Only appropriately trained personnel are permitted to use the device.
We recommend the use of UPS (Uninterruptible Power Supply).
The device must be placed on a solid base with a minimum table load capacity of 25 kg.
In case of short–circuit, spontaneous ejection/insertion of the tray may occur, which could
result in the tray striking the user, squeezing the user by the door/tray.
Scienion AG, 2019, Original user manual, sciREADER CL2 7
To Next Page
Loading...