The device cannot come into contact with liquids.
Do not switch on the device immediately after you bring it in from the cold into warmth - dew
may form on the device components. We recommend at least a 30-minute acclimatization.
Do not dismantle the device, except for dismantling the cover for access to the work area of the
device (more in section 6 Care and Maintenance).
Do not make interventions into the structure of the device.
Do not insert objects other than the dish of the supported format into the working area of the
device.
Do not use force on the accessible mechanical parts of the work space of the device.
Using any kind of tool or instrument to open the doors is not allowed. Do not open the doors
using force. Do not press down on the tray with force.
Do not open the doors and do not try to handle the dish tray with force during scanning.
Do not touch any other part of the device than those that are intended for this purpose.
Do not modify and do not interchange the cables endings.
Use the power cord and USB cable that were supplied with the device.
Do not remove the central grounding pin of the power cable under any circumstances.
Protect the cables against mechanical damage (bending, pinching), avoid inappropriate handling
of cables. Do not expose the cables to heat sources. In the case of power cable damage, stop
using the cable. Consult next steps with the staff of the Service Department.
Do not use the device in case of its damage. Contact the manufacturer and follow its recommendations.
It is not allowed to alter or modify the device or any of its parts in any way.
Servicing and repairs must be carried out only by personnel of the Service Department at
Scienion
AG.
Contact service support
If the device is damaged, do not use it; contact the manufacturer and follow its recommendations.
Volmerstr. 7b
12489 Berlin
Germany
+ 49(0)30-6392-1700 or +1-888-988-3842
support@scienion.com
USsupport@scienion.com
www.scienion.com
e-mail: support@scienion.com
Residual risks
The device was subjected to risk analysis. Based on this analysis, device construction and design meet
current technical equirements.
Despite the correct usage of the device, and following all safety instructions, residual risks due to the
method of usage must also be considered.
Residual risks can be minimized by respecting all safety instructions given by this user manual.
1.2. Intended use
Scienion AG, 2019, Original user manual, sciREADER CL2 6
To Next Page
Loading...