8.0 LinLab - Motorized Device Configuration and Control Software |31
8.0 LinLab - Motorized Device Configuration and Control Software |31
8.3.9 Manipulators/ Creeper
Use the creeper function to move towards your sample slowly and
steadily. Use this menu to set the speed and the distance to be moved.
8.3.10 Manipulators/ PPL Wheel ReMap
PPL Wheel re-map allows you to swap round which wheels control the
different axes. To change click Next until the wheels are in your
preferred configuration.
8.3.11 View
View allows you to select what is shown on the screen from the LinLab
application. The standard view is shown below.
To Next Page
Loading...
