OEM Manual – CUBO
2
SMART
Pag. 17
8.2 On/Off unit
Even if the unit is powered, it will stay in stand-by (regulation OFF) until the user will not turn-on the
regulation (regulation ON).
The main steps to switch ON the regulation are reported here below:
From main menu, press “Enter” button and appear access with password (see A mask).
Note.
Current mask / total masks. The horizontal rows mean access level
Letters and numbers are the name of mask.
Set password (default: 1234) and press “Enter”.
Select “Unit Status” and press “Enter”.
Select “On/off” and press “Enter”
.
Press “Enter”, to change from off to ON
Press “Enter”, to change from on to OFF.
To Next Page
Loading...