SCM CUBO2 SMART - MPXPRO and ULTRACELLA;EVO CAREL regulation

OEM Manual – CUBO
2
SMART
Pag. 20
Connection to ULTRACELLA
8.5 MPXPRO and ULTRACELLA/EVO CAREL regulation
Select “Evaporator” and press “Enter”.
Select “Regulation” and press “Enter”.
St
Regulation
setpoint
Rd
Differential
PLt
Offset
, below the setpoint, to switch off the
regulation (Smooth Lines)
PHs
Maximum superheat offset (Smooth Lines)
P3
Superheat setpoint
P4
Cont
rol valve: Proportional gain
P5
Control valve: Integral time
P6
Control valve: Derivative time
P7
Low Superheat threshold
PSP
Sm
ooth Line: Proportional gain
PSI
Smooth Line: Integral time
PSD
Smooth Line: Derivative time