GENIUS CONCEPT
The new Genius is the result of 2 years of research and development for one of the
lightest trail/marathon bike frame set available on the market, hitting the scale at
below 2300g (5lbs) including the frame, FOX Nude /CTD shock and the unique
TWINLOC remote control.
SCOTT’s focus was not only on lightweight but also on a durable and stiff frame with
an innovative suspension technology in combination with an optimized kinematics of
the rear swingarm.
The combination of an optimized kinematics with an extraordinary suspension
technology closes the gap between superlight dual suspension race bikes (e.g.
SCOTT Spark) and the new generation of all-mountain bikes (e.g. SCOTT Genius LT).
Genius was designed for riders looking for a dual suspended trail and marathon bike
offering a maximum rear wheel travel of 150mm (27.5”)/130mm (29”).
SCOTT does not see frame and rear shock as single components which are
assembled together on a bike, but as a concept with all these components working
together and offering an outrageous function by matching perfectly.
The Genius Concept is based on a multi-pivot technology.
The damping performance was improved in comparison to the already famous
“old” Genius, and with reworking also the kinematics we were able to reach a better
progression in the end of the stroke/travel of the swingarm.
The SCOTT system, using the Nude shock, named TC (Traction Control) will allow
you to reduce by remote control the rear wheel travel from 150mm (27.5”)/130mm
(29”) to 100mm (27.5”)/90mm (29”) including a more progressive spring rate but
still offering a supple break away. In addition the SAG is reduced and the geometry
gets steeper.
Some models of Genius use also the FOX CTD shock which offers instead of the
Traction Mode a Platform (Ride Mode) in between Lock-out Mode and Descent Mode
No power will be lost and an optimum power transfer is guaranteed as the swingarm,
in contrary to locked or automatic-locking systems, can follow the trail surface and
will offer perfect traction and higher speed while standing on the pedals.
GEOMETRY/TECHNICAL DATA GENIUS 650B/27.5”
Travel 150/100/0mm
Suspension
Ratio
2.72
Piston stroke 55mm
Shock length
(Eye to Eye)
200mm
Hardware
Mainframe
22.2mm x 6mm
Hardware
Swingarm
22.2mm x 6mm
Seatpost
diameter
31.6mm
Headset semi integr. for tapered 1 1/8-1.5
(44/54.9mm Inner diameter of frame) or
with 1 1/8 straight (44.0mm)
Fork travel 150mm
Fork length 544mm
BB housing BB PF 92
Front derailleur Shimano E-Type/SRAM S3 direct mount
Bearings 2 x IGUS / 6 x 6802 (24 x 15 x 5)
Max Tire Width 57mm/2.25”
S S M M L L XL XL
LOW BB SETTING HIGH BB SETTING LOW BB SETTING HIGH BB SETTING LOW BB SETTING HIGH BB SETTING LOW BB SETTING HIGH BB SETTING
A
HEAD TUBE
ANGLE
67.9 ° 68.4 ° 67.9 ° 68.4 ° 67.9 ° 68.4 ° 6 7. 9 ° 68.4 °
B
HEAD TUBE
LENGTH
100.0 mm 3.9 in 100.0 mm 3.9 in 110.0 mm 4.3 in 110.0 mm 4.3 in 120.0 mm 4.7 in 120.0 mm 4.7 in 135.0 mm 5.3 in 135.0 mm 5.3 in
C
TOP TUBE
HORIZONTAL
569.9 mm 22.4 in 568.6 mm 22.4 in 599.9 mm 23.6 in 598.6 mm 23.6 in 624.9 mm 24.6 in 623.6 mm 24.6 in 649.9 mm 25.6 in 648.6 mm 25.5 in
D
STANDOVER
HEIGHT
773.1 mm 30.4 in 775.9 mm 30. 5 in 774.6 mm 30.5 in 777.6 mm 30.6 in 8 07.0 mm 31.8 in 810.4 mm 31.9 in 809.0 mm 31.9 in 812.4 mm 32.0 in
E
BB OFFSET -11.6 mm -0.5 in -6.1 mm -0.2 in -11.6 mm -0.5 in -6.1 mm -0.2 in -11.6 mm -0.5 in -6.1 mm -0.2 in -11.6 mm -0. 5 in -6.1 mm -0. 2 in
F
BB HEIGHT 344.9 mm 13.6 in 350.4 mm 13.8 in 344.9 mm 13.6 in 350.4 mm 13. 8 in 344.9 mm 13.6 in 350.4 mm 13.8 in 344.9 mm 13.6 in 350.4 mm 13.8 in
G
WHEEL BASE 1,122.7 mm 44.2 in 1,121.8 mm 44. 2 in 1,153.8 mm 45.4 in 1,152.9 mm 45.4 in 1,179.9 mm 46.5 in 1,179.0 mm 46.4 in 1,206.6 mm 47.5 in 1,205.7 mm 47. 5 in
H
BB CENTER TO
TOPTUBE CENTER
I
BB CENTER TO TOP
OF SEATTUBE
415.0 mm 16.3 in 415.0 mm 16.3 in 440.0 mm 17. 3 in 440.0 mm 1 7. 3 in 475 .0 mm 18.7 in 475.0 mm 18.7 in 510.0 mm 20.1 in 510.0 mm 20.1 in
J
SEAT A N G L E 74.0 ° 74.5 ° 74.0 ° 74.5 ° 74.0 ° 74.5 ° 74 .0 ° 74.5 °
K
CHAINS TAY 439.0 mm 17. 3 in 439.0 mm 17. 3 in 439.0 mm 17.3 i n 439.0 mm 17.3 i n 439.0 mm 17. 3 in 439.0 mm 1 7. 3 in 439.0 mm 17. 3 in 439.0 mm 17. 3 in
L
REACH 401.4 mm 15.8 in 406.1 mm 16.0 in 428.7 mm 16.9 in 433.4 mm 1 7.1 i n 451.1 mm 17. 8 in 455.7 mm 1 7. 9 in 472.1 mm 18.6 in 476.7 mm 18.8 in
M
STAC K 588.8 mm 23.2 in 585.5 mm 23.1 in 598.1 mm 23.5 in 594.7 mm 23.4 in 6 07. 3 mm 23.9 in 603.9 mm 23.8 in 621.2 mm 24.5 in 6 1 7.7 m m 24.3 in
N
STEM LENGTH 60.0 mm 2.4 in 60.0 mm 2.4 in 70.0 mm 2.8 in 70.0 mm 2.8 in 80.0 mm 3.1 in 80.0 mm 3.1 in 90.0 mm 3.5 in 90.0 mm 3.5 in
To Next Page
Loading...
Need help?
General
