PRO-PAK
7
2.8 OPTIONAL
ATTACHMENTS
The available options are:
• Decontamination attachment (DCC)
- facilitates airline connection into a
gas-tight chemical suit, permitting
the wearer to breathe from an
airline during extended
decontamination procedures.
• Rescue mask attachment (RSM) -
permits the wearer to supply a
rescue mask or an air-powered
resuscitator from own cylinder air.
This reduces the duration of the
cylinder supply.
• Airline attachment (AL) - permits
Pro-Pak to be used with an airline.
The cylinder provides emergency
backup.
Note:
Air for use with airlines must conform to
Breathable Air as detailed in Section 1.
2.9 FACEMASKS
Pro-Pak is approved for use with:
Vision 3, PanaSeal, PanaVisor and
Promask PP full facemasks, all of which
conform to EN 136, Class 3 and
AS/NZS1716 : 2003.
All are available with five point, fully
adjustable web or net head-harnesses
and neck-straps.
An inner mask minimises CO
2
dead
space and visor misting. A speech
diaphragm is fitted.
PanaSeal is suitable for medium and
smaller face sizes. PanaVisor is suitable
for medium to larger face sizes.
Vision 3 is available in three sizes: small,
medium and medium/large which cover
most face sizes. Promask PP is available
in two sizes: small/medium and
medium/large.
Vision 3 is moulded in grey silicone,
while PanaSeal and PanaVisor are of
non-dermatitic, black neoprene or blue
silicone. Promask PP is moulded in
hypo-allergenic, black Procomp
TM
with a
soft silicone inner mask.
The polycarbonate visors conform to EN
166 Grade B for medium impact-
resistance and AS/NZS 1337: 1992 for
high-impact resistance.
Versions of the above masks are also
available with helmet attachment clamps
fitted. Please contact Customer Services
for further information.
Vision 3 Facemask with Web Harness
PanaSeal/PanaVisor Facemask with
Net Harness