PRO-PAK
3
1.8 WARRANTY
The products manufactured at our
factories in Skelmersdale and Vaasa
carry a warranty of 12 months (unless
stated otherwise) for parts, labour and
return to site. The warranty period runs
from the date of purchase by the end
user.
These products are warranted to be free
from defects in materials and
workmanship at the time of delivery.
SCOTT will be under no liability for any
defect arising from wilful damage,
negligence, abnormal working conditions,
failure to follow the original
manufacturer’s instructions, misuse or
unauthorised alteration or repair.
Evidence of purchase date will need to be
provided for any claims arising during the
warranty period. All warranty claims must
be directed through SCOTT Customer
Services and in accordance with our
sales return procedure.
1.9 NOTIFIED BODIES
Inspec International Ltd (0194)
56 Leslie Hough Way,
Salford,
Greater Manchester,
M6 6AJ,
England.
British Standards Institute (0086)
389 Chiswick High Road,
London,
W4 4AL,
England.
SAI Global
286 Sussex Street,
Sydney,
NSW 2000,
Australia.
Lic. No 1214.
2. APPARATUS
DESCRIPTION
2.1 GENERAL
Pro-Pak is an open circuit, self-
contained, compressed air Breathing
Apparatus (BA) for use by fire-fighters
and in industrial applications where a high
level of respiratory protection is required.
Standard versions of Pro-Pak feature a
mechanical pressure gauge and whistle
mounted on the left-hand shoulder strap.
Versions specifically intended for use by
fire-fighters are available which
incorporate the IRIS data-
communications system.
Pro-Pak is approved to the following
European Standards:
• EN 137 : 2006 - Including Annex A,
Self-contained Breathing Apparatus
classification: Type 2 - Fire
Fighting.
• EN 139 : 1995 - Self-contained
Breathing Apparatus with airline
attachment when there is no
intermediate split connection in the
MP airline between DV and
Pressure Reducer.
• EN 139 : 1995 - Excluding
requirements of clause 6.7.2, Self-
contained Breathing Apparatus with
airline attachment when there is an
intermediate split connection in the
MP airline between DV and
Pressure Reducer.
Pro-Pak is 'CE' marked in accordance
with EEC Directive EC/686/1986 plus
amendments.
Pro-Pak is approved to Australian/New
Zealand Standard AS/NZS1716 : 2003.
Please call Scott Health and Safety
Limited for further apparatus approval
details.
This manual contains user instructions for
single cylinder, twin cylinder (Duo)
versions and versions for use with
compressed air airlines.
To Next Page
Loading...
Need help?
General
