PRO-PAK
21
6.2 CHECK APPARATUS
1. Operate the DV locking catch and
bypass knob several times and check that
they do not stick. If either is not free
moving, attach explanatory note and
return for service.
2. Check that the harness webbing
and fittings are not worn or damaged; and
that buckles and fastenings are fully
operational. Apparatus with major defects
must be returned for service, with an
explanatory label attached.
3. Check Pro-Pak in accordance with
Section 3 - Pre-Use and Monthly Checks.
6.3 RECORD TEST DETAILS
Record test details in accordance with
local regulations in a Breathing Apparatus
Logbook (available from Scott Health
and Safety Limited under Article Number
1034745).
Information recorded usually includes:
• Name and address of employer
responsible for the apparatus.
• Make, model number or mark
description of any distinguishing
features, sufficient to enable clear
identification.
• The date of the examination
together with the name, signature
or unique authentication mark of
the examiner.
• The condition of the apparatus and
details of any defects found and
any remedial action taken, including
any airline supply equipment used
with the apparatus.
• Cylinder air pressure.
6.4 STORAGE
The apparatus must be stored in a clean,
dry environment away from direct heat
and sunlight. Storage temperature should
not exceed -10°C to +40°C.
To Next Page
Loading...
