SPARK
28 scott-sports.com 29
BIKE OWNERS MANUAL
ENGLISH
SPARK CABLE ROUTING
The direct and straight cable system on all our full suspension models offers perfect
shifting performance combined with lightweight and high resistance against water and
dirt.
CARBON FRONT FRAMES:
The carbon frames of Spark have an internal shifting cable routing with cable stops on
the front end of the downtube as shown in the drawing below.
Please note that the inner cables need to cross each other 1 time on the inside of the
downtube before you pull them out through the cable slot on the lower downside of
the downtube.
Push the cables through the cable guide as shown below and fix the cable guide on
the downtube with a 3mm allen key and a tightening torque of 4Nm/35in/lbs