SPARK
34 scott-sports.com 35
BIKE OWNERS MANUAL
ENGLISH
ADJUSTMENT OF SEATPOST-HEIGHT
REPLACEABLE DROPOUT
IMPORTANT:
The seatpost has to be inserted into the seattube at a minimum of 100mm.
Never use another seatpost diameter than 31.6mm or try to use a shim/reducer
between seatpost and frame.
On Spark bikes of model year 2012 you can replace the rear derailleur hanger.
Depending on the different models you’ll find following options:
1. 142mm axle with RWS 142/12
2. Regular 135 mm rear axle with standard QR
The complete set is available via the Scott distribution with parts number 219574,
the right side replaceable RD hanger with 219577.
The replaceable hanger is available via the Scott distribution with parts number
206473.
In case you want to use other RWS standards we can offer as after-market parts for
specific wheelsets following parts via the Scott distribution:
RWS 135/12 parts set: 219574, right side replaceable RD hanger available with 219576
RWS 135/5 parts set: 219572, right side replaceable RD hanger available with 219575
To Next Page
Loading...
Need help?
General
