SCUBAPRO-UWATEC Chromis User Manual

23
English
CHROMIS USER MANUAL
4.3 SCUBA settings
SET SCUBA
Depth Alarm
Dive Time
Alarm
MB Level
Units
Salt/Fresh
Water setting
-/DOWN
-/DOWN
-/DOWN
-/DOWN
+/UP
+/UP
+/UP
+/UP
+/UP
ESC
ESC
ESC
ESC
ESC
SEL
-/DOWN
A set of SCUBA related selections are
grouped to this menu.
By pressing the SEL button the following
menu’s can be scrolled down.
4.3.1 Maximum dive depth alarm
By pressing SEL button the function starts
blinking and you may select on or off by
pressing + or - buttons.
By pressing the SEL button in this menu
the depth value starts blinking. By pressing
+ or - buttons the value can be selected
from 5 up to 100 meters (20..330 feet) in
1m/5ft steps. The selection is confi rmed by
pressing SEL button.
4.3.2 Maximum dive time alarm
By pressing SEL button the function starts
blinking and you may select on or off by
pressing + or - buttons. By pressing SEL
button in this menu the time value starts
blinking. By pressing + or - buttons the
value can be selected from 5 up to 195
minutes in 5 minutes steps. The selection is
confi rmed by pressing SEL button.
4.3.3 Setting the Micro Bubble level
By pressing SEL button in this menu the
Micro Bubble level starts blinking. By
pressing + or - buttons you may select
personal setting from L0 up to L5. L5 is the
most conservative setting. The selection is
confi rmed by pressing SEL button.

NOTE: more about diving with the MB
levels, read chapter: Diving with MB
levels.

SCUBAPRO-UWATEC Chromis Specifications

General

Brand	SCUBAPRO-UWATEC
Model	Chromis
Category	Diving Instrument
Language	English