SCUBAPRO-UWATEC Chromis User Manual

27
English
CHROMIS USER MANUAL
By pressing SEL on the swim menu, you
reach the swim mode settings. By pressing
SEL the swim mode activation starts
blinking and you may scroll between on/
off by pressing + or – buttons. By pressing
SEL the distance per stroke starts blinking.
You may select the value from 0.5m/2ft to
5.0m/16ft by pressing + or – buttons. By
pressing SEL the selection is confi rmed and
the count stroke threshold starts blinking. A
big threshold setting will detect only large
movement as a stroke, too small setting
may detect too many strokes – you must
test and adjust this according to your style.
By pressing + or – buttons the value can be
selected from 5cm/2inch to 40cm/16inch.
By pressing the SEL button the values are
confi rmed.
4.6 Algorithm selection
-/DOWN
-/DOWN
-/DOWN
+/UP
+/UP
+/UP
ESC
ESC
ESC
SEL
ALGO
SCUBA
GAUGE
APNEA
You may select your Chromis operation mode
between SCUBA, GAUGE or APNEA modes.
When Chromis has not been submerged
for a while the display looks as below:

SCUBAPRO-UWATEC Chromis Specifications

General

Brand	SCUBAPRO-UWATEC
Model	Chromis
Category	Diving Instrument
Language	English