42
CHROMIS USER MANUAL
5.2 Introduction to
SCUBAPRO LogTRAK
LogTRAK is the software that allows
Chromis to communicate with a Windows-
based PC or Mac OS.
In order to take advantage of any of
these features, you need to establish a
communication between your PC and
Chromis with a cradle.
To start the communication
1. Connect the cradle to your PC:
2. Launch LogTRAK on your PC
3. Select the serial port where the cradle is
connected
Extras -> Options -> download
Select the COM port that is used for
Chromis cradle.
4. Place the Chromis on the cradle.
5.2.1 Download dive profi les
From LogTRAK, by selecting Dive ->
Options: Download Dives you can transfer
the Chromis Logbook to your PC or Mac.
There are three main views each showing a
specifi c part of your dive logs:
• Profile showing the graphical data of
the dive.
• Details about the dive, where you can
edit, for example, the equipment and
tank information.
• Location, which shows your dive site at
the world map.
The selection tabs for views are on the top
of the main window.
To Next Page
Loading...
Need help?
General
