Name: SD Biosensor F200
Brand: SD Biosensor
Rating: 5 (1 reviews)

To Next Page

To Previous Page

4. When the timer goes off for test device #1, then insert test device #1 into the

analyzer, the analyzer will display the result in approximately ten seconds.

5. When inserting the test device to the analyzer, the analyzer will automatically

check whether it is used or not. Also, the analyzer will read the barcode data

and check the test device is valid to start the test.

6. Then, the analyzer will automatically scan and analyze the test results on the

screen.

Questions and Answers:

Need help?

Do you have a question about the SD Biosensor F200 and is the answer not in the manual?

SD Biosensor F200 Specifications

General