What to do if the control result is outside the acceptable range on my SD Biosensor SD GlucoNavii NFC?
If the control result falls outside the acceptable range printed on your test strip container, repeat the test. If the results remain consistent, refrain from using your meter and test strips until the issue is resolved. If problems persist, contact SD Biosensor, Inc. at +82-31-300-0400.
What to do if my SD Biosensor SD GlucoNavii NFC Blood Glucose Meter is damaged or shows an error message?
If the meter is damaged or displaying an error message, contact SD Biosensor, Inc. at +82-31-300-0400.
Why my SD Biosensor Blood Glucose Meter is not working: Have the test strips and/or control solution expired?
Ensure that the test strips and control solutions are not past their expiration dates. Check the container/bottle for the expiration date. Note that test strips expire after 6 months and control solutions after 3 months.
What to do if test strips were not stored correctly for SD Biosensor Blood Glucose Meter?
If the test strips were not stored correctly, retest with a new container of test strips.
Why control solutions for SD Biosensor SD GlucoNavii NFC should be at room temperature?
If the control solutions were not at room temperature, retest with a new bottle of control solution, or warm up/cool down the solution to room temperature (18-30°C, 64-86°F).
How to do a test in control solution mode on SD Biosensor SD GlucoNavii NFC?
If you did not perform the test in control solution mode, repeat the test. Insert a test strip, then press the left button for 3 seconds in Blood Stand-by Display to display a control solution container icon.
Read all instructions and understand the system before initial use.
Instructions for setting up alerts, warnings, date, time, and alarms.
Step-by-step guide to conduct a control solution test for accuracy.
Provides checks and actions for resolving issues with control solution tests.
Instructions on washing hands and using the lancing device for blood collection.
Detailed steps for inserting a test strip and applying blood for measurement.
Explains how to interpret normal, high, and low blood glucose readings.
Details the general steps for enabling and using the NFC feature.
Explains meter messages and provides solutions for common errors.
Key safety advisories, system limits, and factors affecting test accuracy.
General| Brand | SD Biosensor |
|---|---|
| Model | SD GlucoNavii NFC |
| Category | Blood Glucose Meter |
| Language | English |
To Next Page