SD Biosensor SD GlucoNavii NFC - Meter Setup and Configuration

16
SD GlucoNavii® NFC BLOOD GLUCOSE MONITORING SYSTEM
Understanding Your New System
10. Meter Set up
STEP-1 : Setting the Audible Beep
1. In Strip Stand-by Display, if you press the ON/OFF
button during 3 seconds, the display for setting the
beep will appear, the rst step of the setting mode.
2. Set the beep mode on or o by pressing either the left
or the right button and then selecting the preferred
feature by pressing the ON/OFF button. If you select
the beep on feature, a ‘beep’ sound is made at the same
time; otherwise, if you select the beep o feature, no
sound is made.
[ During 3 sec. ]
[ Left or right
button ]
[ ON/OFF
button ]