4545
SD GlucoNavii® NFC BLOOD GLUCOSE MONITORING SYSTEM
Using the Meter Memory
45
CHAPTER 5 :
Using the Meter Memory
The meter automatically stores about 500 glucose results,
letting your review them in order from the most recent to
the oldest. If you have set the time/date feature, the time
and date of the results are also displayed. If the memory is
full and a new result is added, the meter deletes the oldest
result.
The meter also calculates three kinds of 7, 14 and 30-day
averages of test results stored in memory, 1)normal, 2)pre-
meal and 3)post-meal state averages. You do not need to
set the time and date for the meter to give you average
calculations. HI/Lo result (results outside of the meter’s
reading range) and results with control solution symbol are
not included in averages.
To Next Page
Loading...
Need help?
General