SD Biosensor SD GlucoNavii NFC - Page 24

23
SD GlucoNavii® NFC BLOOD GLUCOSE MONITORING SYSTEM
Understanding Your New System
STEP5: Setting the alarm
You can use the meter’s alarm function to remind you to
test your blood glucose.
1. After Post-meal alarm setting the display for setting the
alarm will appear, the fth of setting mode.
2. Set the rst alarm on or o by pressing either the left or
the right button and then select the preferred feature
by pressing the ON/OFF button.
[ Left or right
button ]
[ ON/OFF
button ]
t If you select the alarm o feature, next will
appear the Strip Stand-by Display.
t If you select the alarm on feature, you can set
the alarm up to four times a day at any time
you want.
NOTE