To Next Page

To Previous Page

Stage 4) Setting – Date

In stage 4, you set the date

1. After setting the Date Format, set the correct month or day on the display by

pressing either

After setting the Date Format, set the correct month or day on the display by

button and select by pressing the button.

Ex) 1- 1

Stage 5) Setting – Time Format

In stage 5, you set the Time Format in Date & Time setting.

1. Next will appear the display for setting the Time Format. The Analyzer can

display the time in either the 12h format or the 24h format. Set the preferred

format on the display by pressing either

display the time in either the 12h format or the 24h format. Set the preferred

button and select by

pressing the

button.

Stage 6) Setting – Time

In stage 6, you set the Time, in Date & Time setting.

1. Next will appear the display for setting the current Time. Set the hour and minute on the display by pressing either

or button and select by

pressing the

button.

a. 12h Format

sub-step 1) set AM or PM,

sub-step 2) set hour(1 to 12),

sub-step 3) minute(1 to 59)

Ex) 12:00AM

b. 24h Format

sub-step 1) set hour(1 to 24),

sub-step 2) minute(1 to 59)

Stage 7) Setting – Sample Type

In stage 7, you set the Sample Type for lipid test.

1. After setting the Time, the display for setting the Sample Type (SPL) for the

lipid test will appear.

- Capillary or Venous Whole Blood

- Serum or Plasma

SD Biosensor STANDARD LipidoCare User Manual

Questions and Answers: