Operation and Maintenance Manual SC9DF Electronically Controlled Diesel Engine for Agricultural Equipment
62
the battery and install the belt. Prime the fuel system. Fill the engine and oil filter with clean specified lubricating oil
and add proper amount of the oil to the turbocharger from its oil inlet. Check oil and coolant levels, and crank the
engine three to five circles with barring tool. Then follow the starting procedures in Section 3.1 to start the engine. If
the engine is stored for over 2 years, its coolant should be changed and its cooling system should be cleaned. If the
engine has been out of use for a long time, the rubber hoses are aged. Check them for crack, aging before putting the
engine into use, and make replacement if necessary.
To Next Page
Loading...