Operation and Maintenance Manual SC9DF Electronically Controlled Diesel Engine for Agricultural Equipment
1
1 Introduction
1.1 To user and operator
Thank you for purchasing a product of Shanghai Diesel Engine Co., Ltd!
The SC9DF diesel engine for agricultural equipment is developed based on the SC9DF four-valve
electronic-controlled diesel engine. With its power ranging from 206 kW to 235 kW and its emissions compliant with
relevant national regulations, the SC9DF diesel engine for agricultural equipment is perfect power for various tractors,
harvester machinery, etc.
This manual mainly covers technical specifications, operation and maintenance instructions, with an aim to familiarize
you with the engine, as well as the proper operation and maintenance thereof. Before using the engine, read carefully
the relevant contents and requirements in this manual. Due to the continuous improvement of performance and
structure of the engine, the technical specifications and illustrations of the engine in this manual may be slightly
different from those of the engine you have, please note that we will provide the supplement and perfection in the later
editions without notice. In case of any question during your engine operation and maintenance, please never hesitate
to contact SDEC’s after-sale service center spare@sdecie.com for technical advice or guidance.
SDEC has adopted the latest technology and high-quality parts for the engine. The genuine SDEC service parts are
recommended to be used for repair and maintenance. Please contact SDEC’s after-sale service center
spare@sdecie.com for service parts.
Since this manual ensures proper engine operation and maintenance, it should be given to the new owner when the
engine is traded or sold.
1.2 Scope
This manual is for the operation and maintenance of the SC9DF electronically controlled diesel engine for agricultural
equipment.
1.3 Notices for Quality Feedback
To better our service, please provide following information when you make feedback about quality issue(s), whereby,
we can understand and analyze the quality issue(s) and the root cause(s) thereof, and make the improvement in time:
1) When and where fault(s) occurred;
2) The engine serial number, model, order number, delivery date and the detailed address of the consignee;
3) Service conditions, cumulative operation time (in hours or kilometers), operating conditions (power, speed) and the
grade of fuel and engine oil that were used;
4) The characteristics of the driven equipment (model, power consumption and structural feature, etc.);
5) The description of faults;
6）Parts or components claimed for compensation or repair should be mailed or carried in person to SDEC
headquarter with the damage process record or description for facilitating analysis. If there are several problems or a
very serious problem, please leave the site as it was and inform us promptly, and then SDEC will send staff for a joint
analysis.
Quality issues should be settled based on relevant provisions in the quality warranty manual.
1.4 Safety Instructions
Read and understand all safety notes and warnings before use and maintenance of the engine.
This sign in the maintenance section of this manual represents potential dangers that may cause personal
injury or death. However, these dangers can be prevented if one pays close attention and adopts necessary
measures. Take precaution at anytime, for it is impossible for us to predict all potential dangers.
Following safety notes and warnings should be obeyed to avoid any personal injures.
●Be sure to work in a safe place, and be prepared for potential danger at any time.
To Next Page
Loading...