Operation & Maintenance Manual──LG958L/LG959 Wheel Loader
94
z Apply a thin coat of grease to hydraulic piston rods which appear outside.
z Disassemble the negative electrode of the battery and cover it, or remove it from the machine and
store it separately.
z Lower the bucket to the ground and set all control levers to the Neutral position. Press the
parking brake switch and lock the cab door.
3.7.2 During Storage
△
! WARNING
Open doors and windows to ensure ventilation and exhaust to allow
of poisonous gas if the antirust is used in the building.
Start the machine once a month so that lubricant can be coated over the surface of the movable parts
and other components surfaces. The battery in storage can be charged at the same time.
Wipe off the grease which has coated the hydraulic cylinder rods before work and operation.
3.7.3 After Storage
Do as follows after long-term storage of machine.
z Wipe off the grease coated on the hydraulic cylinder rods.
z Add oil and grease to all the requisite positions.
To Next Page
Loading...
Need help?
General
