Operation & Maintenance Manual──LG958L/LG959 Wheel Loader
43
z Check the tire and rim every day for cracks or bubbles. Never operate in a low pressure
condition.
z Check that the bolt and nut of the rim are in place. Check whether the torque of the nut satisfies
the suggested value of the factory.
z Never stand in the front or the rear of the rolling direction of the tire. Check the tire from the side.
If disassembling one tire lock the other tires.
z Take care when welding near a tire, which can cause explosion of the tire.
z Only a trained person with a professional license can repair a tire and rim using specific tools and
following the proper steps.
z Use the uniform tire with the same standard and same flower
pattern for replacement.
8.19.2 Storage of Tires
z It is the basic rule that tires should be stored in a warehouse. No one
can enter without permission. Put a fence around and hang a “No
Enter” sign if the tires are stored outside the warehouse.
z Store the tires in a dry and clean place. Water can oxidize a tire, and
dirt and oil can erode a tire. No light, heat insulation or ventilation
are needed for storage. Cover the tires with a canvas, plastic or other anti-dust cloth. The wrong
storage method can greatly reduce the quality and life of tires.
z Stand the tire on level ground and use a wedge to lock it to prevent it falling down. The quality
may be reduced if the tire is laid on its side. The tire should be rotated (90°) once per month at
least.
z Please stand aside if a tire starts to fall down. Never try to hold a tire since the tires for
engineering mechanisms are generally very heavy, and you may be seriously hurt.
8.20 Waste Materials
Do as follows to prevent pollution:
z Never dump waste oil under ground or into the river.
z Contain the oil vented from the machine in a container; never dump the oil directly onto the
ground.
z Obey the relative rules and laws when dealing with harmful materials such as grease, fuel,
To Next Page
Loading...
Need help?
General
