Operation & Maintenance Manual──LG958L/LG959 Wheel Loader
77
slope, in order to avoid dangerous from power cut.
△
! WARNING
Never use the parking brake switch to brake or slow the
speed of the machine while running unless in an
emergency.
3.4 Stopping
3.4.1 Steps to Stop
z Release the accelerator, and press the brake pedal to
stop the machine. Put the gear control lever in the
neutral position.
z After safely stopping, push the parking brake switch to
lock the machine in parking state.
z Level the bucket and other work equipment to the
ground.
z Stop the machine on the level ground where there is no
danger of stone falling, coasting or flooding. If it is necessary to stop the machine on a slope,
wedge the wheels to prevent movement.
3.4.2 Steps to Stop Engine
z Let the engine run freely for 5 minutes to cool all the parts equally.
z Pull the flameout control soft shaft.
z Turn the key to OFF position. And draw it out and keep in a safe place.
△
! WARNING
Never pull the flameout control soft shaft before the engine
is cooled.
3.4.3 Leaving Loader
To Next Page
Loading...
Need help?
General
