Operation & Maintenance Manual──LG958L/LG959 Wheel Loader
15
3 SAFETY OPERATION
3.1 Be Familiar with Machine
z Study the operation manual for the machine. Learn
the structure of the machine, operation and
maintenance. Be familiar with the positions and
functions of the buttons, operation handles, meters
and warning devices.
z Know all the rules in operation; understand the
gestures of signaling staff.
z If there is any oil near the operating positions that
can cause slippage, clean it immediately.
z Check all the safety items, for example, the safety
protective devices should be at the safe status. Make
sure the tires are not worn and the tire pressure is
normal. Routinely check for oil leaks, water leaks,
air leaks, deformation, loose fittings and abnormal
sounds or accidents may occur. Check the safety
devices routinely.
3.2 When Leaving Operator’s Seat
z Always keep the parking brake switch in the lock
position.
z Level the working equipment completely to the
ground and put the gear control lever and working
equipment control handle in the neutral position,
then stop the engine and turn off the starting switch.
Set the stop block on the front and rear wheels if
necessary.
z Make sure the loader is locked and put the key in a
safe place.
To Next Page
Loading...
Need help?
General
