Operation & Maintenance Manual──LG958L/LG959 Wheel Loader
44
coolant, solvent, filter and storage battery.
9 SAFETY TRANSPORTATION
9.1 Assemble and Disassemble the Machine
z Keep the engine speed low during loading and unloading the machine. Take good care for there
are potential dangers.
z Load and unload machine on level ground and remain at a safe distance off the road.
z Secure the tires well during loading and unloading the machine to make sure it will not move. Put
a cushion under the gangway.
z Slope boards should be strong enough with sufficient length and width to form a safe slope. The
angle with the ground should not be larger than 15°. Keep a safe distance between slope board
and board, board and machine.
z Make sure the height of the two sides of the board is uniform to ensure firm orientation.
z Keep the board surface clean, free of lubricant, oil, ice and loose materials. Clean the dirt off the
tires.
z Never turn around on the slope board. If it is necessary, turn outside the board and then drive
back.
z Lock the direction mechanism after assembly, wedge the tires and tie the machine tightly with
cords.
9.2 Transportation on the Ground
z Obey the rules about weight, height, width and length prescribed by national and local laws for
transporting the machine using a tow truck. Obey the traffic rules.
z Know the weight, height, width and length of machine regulation before deciding the transport
routine.
z Know the allowed limit of weight bearing when passing bridges or private buildings. Obey the
relative rules when driving on the public roads.
z The machine may be unloaded when using other transportation. Please contact Shandong
Lingong Construction Machinery Co. Ltd. or their accredited representative.
To Next Page
Loading...
Need help?
General
