Operation & Maintenance Manual──LG958L/LG959 Wheel Loader
67
z Be sure to use the front and rear frame locking bar during
maintenance or transporting the machine.
z Be sure to release the frame locking bar during routine travel.
The frame locking bar is used to lock the front and rear frames during maintenance or transporting
vehicles, in order to prevent the frames from moving.
1.2.7 Towing Pin
During towing, insert the towing pin 1 into the counterweight 2.
1.2.8 Fuse
△
! NOTICE
z Always be sure to close the startup switch before replacing the
fuse .The fuse is used to protect the wiring and cable from burning
out. If the fuse has become corroded by oxidation, or the fuse is
loose in the fuse holder, please replace the fuse.
z When replacing the fuse, please replace with a fuse of the same
specification.
1.2.9 Air Condition (if assembled)
1.2.9.1 control panelⅠand its operation
(if assembled)
z The Appearance of Panel
The panel of air conditioning is on the right
operator box.
1. Working Indicator Lamp
2. Air Volume and Power Switch
3. The Switch to Control the Temperature
To Next Page
Loading...
Need help?
General
