Operation & Maintenance Manual──LG958L/LG959 Wheel Loader
70
z When adjusting the cab’s seat, park the machine in a safe
place and stop the engine.
z Adjust the cab’s seat before starting operation or replacing
the operator.
z Make sure that you can depress the brake pedal completely
when your back is against the seat backrest.
z Weight Adjustment
The weight adjustment handle is in the middle of seat bottom.
Turn the handle anticlockwise to reduce the damping stiffness
and turn clockwise to increase the damping stiffness. Rotate
the damping stiffness adjust handle A by hand according to the
operator’s weight until feel comfortable.
z Fore-and-Aft Adjustment
This handle is on the left bottom side of the seat. Pull the
fore-and-aft handle B and move the seat forward or backward to the desired position; it will lock
automatically after pushing it down.
z Backrest Angle Adjustment
Put the backrest angle adjust handle C upward to pull the backrest until the angle is comfortable.
The backrest angle is locked when loose the handle.
z Height Adjustment
There are three positions for the height of seat, and the operator can adjust according to the need.
During adjusting, set the base under the seat by two hands and draw up forcibly and stably. When
the cracking sound is sounded, please loose your hands, then the seat will fix in this position.
Adjust the position of seat to the highest position and draw up forcibly, and then press down, the
seat will fall to the lowest position.
z Headrest Height Adjustment
Set the headrest of seat by two hands, and then draw up or press down forcibly to adjust the
height of headrest.
1.2.11 Use of Safety Belt (if assembled)
If the safety belt is assembled on the seat, please tie it when operating the machine. Before using
safety belt, please check the degree of wear and firm. Replace it if it is necessary.
Adjust the length of safety belt before using to make sure the safety belt can be used for safety
guarantee and comfort. Move the position of lock on the safety belt to adjust the length of safety belt.
To Next Page
Loading...
Need help?
General
