Back-up to perform GS 1 Rental application Stop Faults Alarms
A633: Power plant without shared switching unit
without Normal/Emergency Digital Bus
Validation
Number of gen sets in power plant 2
Genset number 1
6. Press the generating set number on the touch screen.
Back-up to perform GS 1 Rental application Stop Faults Alarms
A633: Power plant without shared switching unit
without Normal/Emergency Digital Bus
Validation
Number of gen sets in power plant 2
Genset number 1
7. Enter the number of generating sets in the power plant using the numeric keypad. Start with “0” if the number is less than 10
generating sets.
E.g.: 2 generating sets
enter 0 then 2; 10 generating sets enter 1 then 0.
8. Press “Valid” to confirm the entry.
Number of gen sets in power plant
0<= 02 <=15
Valid Esc.
To Next Page
Loading...
