SDMO R570U - Page 106

15/07/09 19:10 :00 GS 1
User parameters
(1/2)
Stop Faults Alarms
Power return
Confirmation request
No load test time delay
(sec) :
600
Power 1
Power loss time delay
(sec) :
3
Power return time delay
(sec) :
180
Inversion in non-coupl.
In emergency mode
Inversion in non-coupl.
In normal mode
-1-
Set point
-2-
Wattmetric COntrol
-3-
Generating set priority
4. Press “Generating set priority” on the touch screen.
15/07/09 19:10 :00 GS 1
Generating set
priority
Stop Faults Alarms
Modification
GS select. 01
Priority
select
02
Valid
Return to the previous
priorities
Display
GS 1 2
PRI 02 01
-1-
General parameters
-2-
Thresholds
5. Press the selection arrows on the touch screen to select the generating set.
Whithout
Whithout
Without
104/297