EasyManua.ls Logo

SEA JACK - Risk Examination

SEA JACK
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fig. 56
REV 00 - 03/2014
17. PERIODICAL MAINTENANCE
Check the oil level
(Trasparent cap n.14 in Fig. 8)
Annual
Change the oil
Verify the functionality of the by-pass valves
(check the force in opening and closing)
Check the release function
Verify the slowdown regulation (where present)
Check the correct drain of the rainwater
Check the integrity of the connection cables
Grease all the moving parts
Grease the rotation axis of the box as in Fig.54
4 years
Annual
Annual
Annual
Annual
Annual
Annual
Annual
SAFETY GATE
18. ACCESSORIES FOR JACK
CARRYING BOX INOX
RELEASE
RELEASE PLUS
KIT MECHANICAL STOP
MECHANICAL INSTALLATION
International registered trademark n. 2.777.971
16. RISK EXAMINATION
The points pointed by arrows are potentially dangerous.
The installer must take a thorough risk examination to prevent
crushing, conveying, cutting, grappling, trapping so as to
guarantee a safe installation for people, things and animals. (
).
in fig. 56
Re.
Laws in force in the country where installation has been made
As for misunderstandings that may arise refer to your area
distributor or call our help desk. These instructions are part of the
device and must be kept in a well known place.The installer shall
follow the provided intructions thoroughly.
products must only be used to automise doors, gates and lwings.
Any initiative taken without explicit authorization
will preserve the manufacturer from whatsoever responsibility.
The installer shall provide warning notices on not assessable
further risks. in its relentless aim to improve the
products, is allowed to make whatsoever adjustment without
giving notice. This doesn’t oblige to up-grade the
past production. can not be deemed responsible
for any damage or accident caused by product breaking, being
damages or accidents due to a failure to comply with the
instructions herein. The guarantee will be void and the
manufacturer responsibility will be nullified if
original spare parts are not being used.
Packaging
materials such as plastic bags, foam polystyrene, nails etc must
be kept out of children’s reach as dangers may arise.
SEA USA Inc.
SEA USA Inc.
SEA USA Inc.
SEA USA Inc.
SEA USA Inc.
SEA USA Inc.
The electrical installation
shall be carried out by a professional technician who will release
documentation as requested by the laws in force.
LYRA, JACK
67411785
15

Related product manuals