Seastar Solutions Seastar PROTAP Controller User Manual

2
SeaStar ProTap Controller
2.2 Important Labels
The safety information provided below is intended to
inform you of the warning information on your product.
Please contact SeaStar Solutions if the label is missing.
5. Confirm that the steering cylinder can be fully
stroked in both directions as well as full tilt and trim
without stretching, chafing, rubbing and/or kinking
of the hydraulic hoses.
6. Confirm that extruded nylon tubing has NOT been
substituted for SeaStar Steering Hose.
Figure 2-1.
Prior to Every Use
1. While device is off, verify immediate response of all
actuators attached to this device.
2. Turn the device on through the on/off switch and
verify immediate response of all actuators attached
to this device.
3. Check for binding, loose, worn or leaking steering or
Jackplate components.
4. Confirm there is no binding, kinking or chafing of any
wires connected to this device.
Do not operate boat if any component is not in proper
working condition.
WARNING

Seastar Solutions Seastar PROTAP Controller Specifications

General

Brand	Seastar Solutions
Model	Seastar PROTAP Controller
Category	Boating Equipment
Language	English