EasyManua.ls Logo

Seaward APOLLO 600+ - Page 4

Seaward APOLLO 600+
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
APOLLO 600+
PG 4 TESTED. TRUSTED… WORLDWIDE.
IMPORTANT SAFETY INSTRUCTIONS
Instrument-Internal Rechargeable Battery
Use rechargeable batteries in undamaged condition only. Risk of explosion and
fire in the case of damaged rechargeable batteries!
Inspect the rechargeable batteries before use. Pay particular attention to leaky
and damaged rechargeable batteries.
When using rechargeable batteries, the instrument may only be used with
inserted and secured battery compartment lid. Otherwise, dangerous voltages
may occur at the rechargeable battery contacts under certain circumstances.
Only charge undamaged rechargeable batteries. Risk of explosion and fire in the
case of damaged rechargeable batteries!
Inspect the rechargeable batteries before charging. Pay particular attention to
leaky and damaged rechargeable batteries.
Measurement Cables and Establishing Contact
Plugging in the measurement cables must not necessitate any undue force.
Never touch conductive ends (for example of test probes).
Avoid short circuits due to incorrectly connected measurement cables.
Ensure that alligator clips and test probes make good contact.
Do not move or remove test probes and alligator clips until testing/measurement
has been completed.
Only use original accessories and/or the measurement cables and test probes
which are part of the scope of delivery.
Calibration
Comply with national calibration regulations and laws.
Calibrations must be carried out by authorized service departments.
Emissions
The instrument is equipped with a Bluetooth® module. Make sure that the
frequency band from 2400MHz to 2483.5MHz may be used in your country.
Data Security
Always create a backup copy of your measurement/test data.
The instrument is equipped with a data memory to which personal and/or
sensitive data can be stored. Observe and comply with the applicable national
data protection regulations. Use the corresponding functions provided by
the test instrument (such as access protection), as well as other appropriate
measures to prevent unauthorized access to the data.

Related product manuals