Seca 264 - Activate Wireless Module; Operating the Device in a Wireless Group (Menu); Set up Wireless Group (Lrn); System

68 •
6.2 Operating the device in a wireless group (menu)
All the functions required to operate the device in a
seca wireless group can be found in submenu "rF".
.
* For information on how to navigate within the menu
of the head slide, see page 62.
Activate wireless
module (system)
The device is supplied with the wireless module
disabled. You have to activate it before you can set up
a wireless group.
NOTE
Power consumption is increased with the
wireless module activated.
1. Switch the device on.
2. Select the "SYS" menu item from the "rf" submenu.
3. Confirm the selection.
4. Select the "on" setting.
5. Confirm the selection.
You will leave the menu automatically.
Set up wireless group
(Lrn)
To set up a wireless group proceed as follows.
1. Switch the device on.
2. Call up the menu.
rF*
Reg. Devices (Mo)
• Channel 1 (C1)
• Channel 2 (C2)
• Channel 3 (C3)
StopRoom (ID)Learn
Autosend
• on
• off
System
• on
• off
Autoprint
Time
• Year
• Month
• Day
• Hour
• Minute
• on
• off
….
….