Software seca
14.11.12/RLEU/ARI/MRE 33/40 30-34-00-812c
5.4 Updating the Radio Module Software
The lower part of the main window is intended for the actual updating of the
radio modules. The radio modules in the active wireless group are shown in a
list together with a symbol.
Symbol Meaning
“No Action” – updating is not carried out.
“Waiting” – this radio module is going to be updated but is still in
the queue.
“Transmitting” – this radio module is just being updated.
“OK” – this radio module has been updated successfully.
“Error” – an error occurred while updating this radio module.
Use the buttons on the right to activate or deactivate updating of the individual
modules or enable all modules in the list to be updated in succession.
To Next Page
Loading...
