46 •
English
CONTENTS
1. Full certification . . . . . . . . . . . . . 48
2. Description of device. . . . . . . . . 49
2.1 Congratulations! . . . . . . . . . . . 49
2.2 Intended use. . . . . . . . . . . . . . 49
3. Safety information . . . . . . . . . . . 50
3.1 Basic safety precautions . . . . . 50
Handling the instrument. . . . . . 50
Use of measured results . . . . . 51
3.2 Safety information in this
manual . . . . . . . . . . . . . . . . . . 51
3.3 Handling (rechargeable)
batteries . . . . . . . . . . . . . . . . . 52
4. Overview . . . . . . . . . . . . . . . . . . . 53
4.1 Controls/Features . . . . . . . . . . 53
4.2 Symbols in display . . . . . . . . . 54
4.3 Information on rating plate. . . . 55
4.4 Menu structure . . . . . . . . . . . . 56
5. Before you get started … . . . . . 57
5.1 Scope of delivery . . . . . . . . . . 57
5.2 Assembling the instrument . . . 58
Assembling the push handle . . 58
Assembling the display housing 58
Fastening the weighing cell
cable . . . . . . . . . . . . . . . . . . . . 59
Assembling the seat . . . . . . . . 60
Assembling the armrests . . . . . 60
5.3 Establishing the power supply. 61
Insert the rechargeable battery
block. . . . . . . . . . . . . . . . . . . . 61
Connect the power supply unit 62
6. Operation . . . . . . . . . . . . . . . . . . 63
6.1 Weighing. . . . . . . . . . . . . . . . . 63
Switching on the scale. . . . . . . 63
Start weighing . . . . . . . . . . . . . 64
Tare off additional weight
(TARE). . . . . . . . . . . . . . . . . . . 65
Continuous display of
measured result (HOLD) . . . . . 65
Determine and evaluate body
mass index (BMI). . . . . . . . . . . 66
Transmit measured results to
aradio receiver. . . . . . . . . . . . 67
Calculate and print out BMI
automatically. . . . . . . . . . . . . . 67
Switch off scales . . . . . . . . . . . 68
6.2 Additional functions (menu) . . . 68
Navigate in the menu . . . . . . . 69
Clear stored values
automatically (AClr) . . . . . . . . . 69
Permanently store additional
weight (Pt). . . . . . . . . . . . . . . . 70
Activate Autohold function
(Ahold) . . . . . . . . . . . . . . . . . . 70
Activate acoustic signals
(BEEP) . . . . . . . . . . . . . . . . . . 71
Select attenuation (Fil) . . . . . . . 71
Switch weight unit (Unit) . . . . . 72
Restore factory settings
(RESET) . . . . . . . . . . . . . . . . . 72
7. seca 360° wireless Network . . . 73
7.1 Introduction . . . . . . . . . . . . . . 73
seca wireless groups. . . . . . . . 73
Channels. . . . . . . . . . . . . . . . . 74
Detection of equipment devices74
7.2 Operate scales in a wireless
group (menu). . . . . . . . . . . . . . 75
Activate wireless module (SYS) 75
Set up wireless group (Lrn) . . . 75
Activate automatic transmission
(ASend). . . . . . . . . . . . . . . . . . 77
Select print option (APrt) . . . . . 78
Set time (Time) . . . . . . . . . . . . 78
8. Cleaning . . . . . . . . . . . . . . . . . . . 79
9. What to do if …? . . . . . . . . . . . . 79
10. Maintenance . . . . . . . . . . . . . . . 81
11. Technical data . . . . . . . . . . . . . . 81
12. Accessories . . . . . . . . . . . . . . . . 83
To Next Page
Loading...
