Seca 954 - Channels; Detection of Equipment Devices

74 •
Channels The devices communicate with each other within each
wireless group via three channels (C1, C2, C3). This
ensures reliable, troublefree data transmission.
When you set up a wireless group with the scales, the
device will suggest three channels guaranteeing opti-
mum data transmission. We recommend accepting the
channel numbers suggested.
You can also select the channel numbers (0 - 99) man-
ually, for example if you want to set up more than one
wireless group.
The channels must be sufficiently far apart to ensure
troublefree data transmission. We recommend a spac-
ing of at least 30. Each channel number may only be
used for one channel.
Example of configuration; channel numbers when set-
ting up 3 wireless groups within one surgery:
•Wireless group 0: C1=_0, C2= 30, C3=60
•Wireless group 1: C1=10, C2=40, C3=70
•Wireless group 2: C1=20, C2=50, C3=80
Detection of equipment
devices
If you wish to set up a wireless group with the scales,
they will search for other active devices from the
seca 360° wireless system. The devices detected are
shown as modules in the display on the scales (e.g.
MO 3). The meaning of the numbers is as follows:
•1: Personal scales
•2: Length measuring device
•3: Wireless printer
•4: PC with secaUSB wireless module
•7: Baby scales
•5, 6 and 8-12: Reserved for system expansion
0
C1
C3
C2